Horizon Fitness E401 User Manual page 7

AS SE MB LY ST EP 
CONSOLE MAST
WATER BOTTLE HOLDER
PRE-ATTACHED SCREWS
FRONT HANDLEBAR COVER
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A Attach WATER BOTTLE CAGE to CONSOLE MAST using PRE ATTACHED SCREWS.
B Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
Note the position of the snap tabs on the covers before snapping into position.
C Repeat on other side.
12
E401_Rev.1.5.indd 12-13
ASSEMBLY STEP 
UPPER HANDLEBAR
BACK HANDLEBAR COVER
CONSOLE
CONSOLE MAST
LOWER HANDLEBAR
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect
ADAPTOR to a power outlet.
YOU'RE FINISHED!
NOTE: There is NO hardware bag for this step.
All hardware is pre-installed.
A Attach the CONSOLE MAST wires to the
CONSOLE WIRES
CONSOLE.
B Carefully tuck the CONSOLE WIRES into
PRE-ATTACHED
SCREWS the CONSOLE MAST before attaching the
CONSOLE.
C Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from the
CONSOLE first).
AC ADAPTOR INPUT
* NOTE: Be careful
not to pinch
any wires while
installing the
console.
1
2/29/08 10:05:40 AM