Assembling Cleaner; Carton Contents - Hoover WindTunnel WindTunnel Upright Bag Vacuum Cleaner Owner's Manual

1. Assembling cleaner

This cleaner was inspected and packaged carefully before being shipped from the
factory. If you should happen to need assistance during assembly or operation, call
1-800-944-9200 for an automated referral of authorized service outlet locations
(U.S. only) OR
1-330-499-9499 to speak with a representative in our Consumer Response Center
OR
Visit us online at www.hoover.com to find the service outlet nearest you (click on
the "Service" button).

Carton contents

1-1
A
B
Remove all parts from carton and
identify each item shown. Make
sure all parts are located before
disposing of packing.
A. Handle section
B. Cleaner body
C. Hose rack
D. Hose, cleaning tools and wands
E. Handle bolts and nuts packet
(in bag with owner's manual)
F. Powered hand tool
STEP 1 Attach rack and handle
1-2
Open tool cover on handle section
(A).
Not
C
D
1-3
B
C
A
Attach hose rack to handle section
by fitting hooks (B) on rack over
slots (C) on handle section.
E
F
Note: The white switch lock above the ON/OFF switch aids
in the assembly of your cleaner. Assembly can be continued
if the switch lock is missing. However, do not remove the
switch lock until assembly is completed.
1-4
Align hole on rack with circular tab
on handle.
Continued
3