Questions or Concerns?
This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen
to need assistance during assembly or operation,
Visit us online at www.hoover.com to find the service outlet nearest you (click on the "Service" button) OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
Call 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
1. Assembling cleaner
Carton contents
1-1
A
D
1-3
A
B
Attach wand, tools and
nozzle
To attach wand to hose, push wand
firmly onto hose; twist wand to align
the arrow on the hose (A) with the
arrow on the end of the wand (B).
All manuals and user guides at all-guides.com
Unpack cleaner from carton and
B
identify the parts shown.
Remove and dispose of packing.
A. Canister cleaner
B. Rug and floor nozzle
C
C. Filter bag (installed in canister)
D. Hose
E. Telescopic wand
E
1-4
Lift tool lid to reveal tool storage
compartment (see Fig. 2-8).
To attach tools to the hose or the
wand, push tool firmly onto hose.
Twist tool slightly to tighten or loosen
connection.
To attach the nozzle to the wand,
push the nozzle firmly onto the
wand. Align the arrow on the nozzle
connector (C) with the arrow on the
end of the wand (D).
Connecting hose,
wand and nozzle
1-2
Connect hose
Push hose connector into opening in
bag lid. To disconnect hose, depress
buttons on hose connector and pull
up.
1-5
D
C
To adjust the telescoping wand,
press on spring latch (E) and pull up
on upper portion of wand. Adjust
wand to desired length. Release
latch to lock the wand in position.
E
3