1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT TO NORTH CANTON FOR SERVICE.
1. Assembly Attach casters (standard models) Remove cleaner lid. Turn cleaner tank upside down (A). Insert caster stem into hole on bottom of tank. Press firmly until caster snaps into place. Repeat with remaining casters. Turn cleaner tank right side up. Attach caster supports and casters (supreme models)
Page 5
Use squeegee for wet pick-up only. Additional tools and accessories that are not included with your model are available at additional cost from your Hoover Factory Service Center, Authorized Hoover Warranty Dealer, by using the enclosed order form, or through The Hoover Comapny on- line at www.hoovercompany.com...
2. How to use The assembled cleaner will look like the drawing. Cleaner Description 1. ON/OFF switch 2. Lid latches 3. Cleaner lid 4. Hose inlet 5. Hose 6. Tank 7. Caster supports* 8. Casters 9. Tank drain cap 10. Carrying handles located on both sides of tank 11.
Extension cord instructions Use at least a 16 gauge, grounding type, SVT or SJT type extension cord. The extension cord must employ a 3-prong grounding type plug and a 3-pole receptacle that accepts the machine plug. Dry pick-up With foam and paper filters in place and cleaner lid locked onto tank, attach the desired tool to hose end.
All filters, including the cartridge filter, are available at your Hoover Factory Service Center, Authorized Hoover Warranty Dealer, on the enclosed order form, or by writing to The Hoover Company, North Canton, Ohio 44720.
• Automatic shut-off engaged. • See “Automatic wet shut-off” section HOOVER y son marcas registradas ® THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 R1 4-98 S6530/45/50 THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 HOOVER and are registered trademarks ® THE HOOVER COMPANY, NORTH CANTON, OHIO 44720...