Attach Hose; Position Tools - Hoover U8315960 Owner's Manual

Remove telescoping
handle/wand
E
E
4 To remove the telescoping
handle/wand for tool use,
push down either release latch (E)
and pull upwards to remove.
L
J
Snap crevice tool (J), dusting brush
7
(K) and furniture nozzle (L) into
storage areas on back of cleaner.

Attach hose

G
F
5
Stretch hose and guide into hose
clip (F). Align button on hose con-
nector (G) with hole on hose end (H).
Slide hose end over connector until the
button "pops up" into place. To remove
hose from hose connector, press button
and pull hose end to release.
The hose connector swivels 360° for
convenience.
K

Position tools

H
the cleaner. Place bottom of tool into
recessed area first, pivot tool up and
snap in place.
I
The powered pet hair cleaning
6
tool (I) is stored on the front of
(Cont'd)
05