TUB DRUM [FRONT]
DRUM ASSEMBLY
-1
CHANGING THE DRUM LAMP
-1
-2
45
WARNING !
!
When you disassemble the lamp connector, be
sure to take gloves and handle the frame and
other parts carefully to avoid cuts. Failure to do
this could lead to a serious injury.
1.
Open the top plate.
2.
Remove Cover Cabinet.
3.
Disconnect the door lamp and electrode
sensor connector.
4.
Remove 4 screws.
5.
Disassemble the Tub Drum (Front) assembly.
1.
Open the top plate.
2.
Remove the Cabinet Cover and
Tub Drum (Front) assembly.
3.
Loosen belt from motor and idler pulleys.
4.
Carefully remove the drum.
1.
Open the door.
2.
Hold the lamp shield in place while removing the
screw.
3.
Slide the shield up and remove.
4.
Remove the bulb and replace with a 15-watt, 120-volt
candelabra-base bulb.
5.
Replace the lamp shield and screw.