Test 10 Generator Assembly - LG DLEX3885 Series Service Manual

Test 10
Generator Assembly
Caution
Trouble Symptom
Measurement Condition
Before measuring resistance, be sure to turn Power off, and do voltage discharge.
(When discharging, contact the metal plug of Power cord with earth line.)
① During Steam cycle, Generator Assembly is not heating.
② During Diagnostic Test, tE4 Error occurs.
Turn the Dryer's Power Off, then measure resistance.
Is resistance 14.3 Ω ( ± 5%) between Heater
terminal ① and ② ?
Normal condition
YES
36
• Replace the
Generator
NO
Assembly
• If measured
resistance value is
∞, replace the
Generator
Assembly too.