Underwater White Balance - Sony DSC-W350 Instruction Manual

Underwater White Balance

Adjusts the color tone when the camera is set to
(Underwater) for movies.
1 MENU t (Underwater White Balance) t desired mode
(Auto)
(Underwater 1) Adjusts for underwater conditions where blue is strong.
(Underwater 2) Adjusts for underwater conditions where green is strong.
(One Push)
(One Push
Set)
Notes
• Depending on the color of the water, the Underwater White Balance may not work correctly even though
you select [Underwater 1] or [Underwater 2].
• When flash is [On], the underwater white balance can only be adjusted to [Auto], [One Push], or [One
Push Set].
• [One Push Set] is unable to be selected while charging the flash.
• The white references loaded using [White Balance] and [Underwater White Balance] are stored
separately.
(Underwater) mode in Scene Selection or
Automatically adjusts color tones underwater so they appear
natural.
Adjusts the white balance depending on the light source. The white
color memorized in [One Push Set] mode becomes the basic white
color. Use this mode when [Auto] or other modes cannot be set the
color properly.
Memorizes the basic white color which will be used in [One Push]
mode (page 55).
56 GB