Using The Software - Sony DSC-W350 Instruction Manual

Using the software

Installing "PMB (Picture Motion Browser)" and
"Music Transfer" (Windows)
1 Turn on your computer, and insert the CD-ROM (supplied) into the CD-
ROM drive.
The installation menu screen appears.
• If it does not appear, double-click [Computer] (in Windows XP, [My Computer]) t
(SONYPMB).
• If the AutoPlay screen appears, select "Run Install.exe" and follow the instructions that appear on the
screen to proceed with the installation.
2 Click [Install].
The "Choose Setup Language" screen appears.
3 Select the desired language, then proceed to the following screen.
The "License Agreement" screen appears.
4 Carefully read the agreement, click the radio button (
the terms of the agreement, and then click [Next].
5 Follow the instructions on the screen to complete the installation.
• For the installation, connect the camera to the computer during the procedure (page 111).
• When the restarting confirmation message appears, restart the computer following the instructions on
the screen.
• DirectX may be installed depending on the system environment of your computer.
6 Remove the CD-ROM after the installation is complete.
7 Start up the software.
• To start up "PMB", click
For the detailed operation method, see "PMB" support page (http://www.sony.co.jp/pmb-se/)
(English only), or click
• To start up "PMB" from the Start menu, select [Start] t [All Programs] t
Notes
• Log on as Administrator.
• When "PMB" is started up for the first time, the confirmation message of the Information tool appears on
the screen. Select [Start].
(PMB) on the desktop.
(PMB Help).
) to accept
t
(PMB).
109 GB