Optical Disk Drive - Toshiba TECRA A8 User Manual

Floppy disk slot
Eject button
Check the Disk-In-Use indicator when you use the USB floppy disk drive.
Do not press the eject button or turn off the computer while the light is
glowing. Doing so could destroy data and damage the floppy disk or the
drive.
■
The USB floppy disk drive should be placed on a flat, horizontal surface
when in use.
■
Do not set anything on top of the floppy disk drive.

Optical disk drive

One of the following Optical disk drives is installed in the computer:
CD-ROM, DVD-ROM, DVD-ROM&CD-R/RW and DVD Super Multi drives.
An ATAPI interface controller is used for CD/DVD-ROM operation. When
the computer is accessing a CD/DVD, an indicator on the drive glows.
For information on loading and unloading discs refer to the
disk drive
Region codes for DVD drives and media
DVD-ROM&CD-R/RW, DVD Super Multi drives and their associated media
are manufactured according to the specifications of six marketing regions.
When you purchase DVD-Video, make sure it matches your drive,
otherwise it will not play properly.
Code
1
2
3
4
5
6
User's Manual
Insert a floppy disk in this slot.
When a floppy disk is fully seated in the drive, the
eject button pops out. To remove a floppy disk,
push in the eject button and the floppy disk pops
out partially for removal.
section in Chapter 4,
Region
Canada, United States
Japan, Europe, South Africa, Middle East
Southeast Asia, East Asia
Australia, New Zealand, Pacific Islands, Central America, South
America, Caribbean
Russia, Indian Subcontinent, Africa, North Korea, Mongolia
China
Operating Basics.
The Grand Tour
Using optical
2-13