NETGEAR WNR2000v4 User Manual page 32

(the router is capable of speeds of up 300 Mbps) and does not function with WPS. However,
if you set up a wireless distribution system (WDS; see
on page 84), WEP is the only security that can be supported.
Note: The WEP option displays only if you select Up to 54 Mbps from the
Mode menu.
To configure WEP security:

1. In the Security Options sections of the Wireless Settings screen, select the WEP radio
button.
2. In the Authentication Type list, select one of the following types:
• Automatic. If you enter a passphrase in the Passphrase field and click the Generate
button, the four keys are automatically generated.
• Shared Key. If you select this option, you need to select one key and enter the value
manually.
3. In the Encryption Strength list, select the encryption key size:
• 64-bit. Standard WEP encryption, using 40/64-bit encryption.
• 128-bit. Standard WEP encryption, using 104/128-bit encryption. This selection
provides higher encryption security.
4. Depending on the authentication type, generate the key automatically or enter it manually:
• If the authentication type is Automatic:
a. In the Passphrase field, enter a passphrase:
b. Click the Generate button.
N300 Wireless Router WNR2000v4
genie Basic Settings
32
Wireless Distribution System (WDS)