Ipv6 Pass Through; Ipv6 Fixed - NETGEAR WNR2000v4 User Manual

Note: The remote relay router is the router to which your router creates the
6to4 tunnel. Make sure that the IPv4 Internet connection is working
before your apply the 6to4 tunnel settings for the IPv6 connection.
4. Configure the LAN setup and IPv6 filtering settings as explained in
the procedure to set up an IPv6 Internet connection through auto detection (see
Detect on page 107).
5. Click the Apply button.

IPv6 Pass Through

In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header
packets.
To set up a pass-through IPv6 Internet connection:

1. Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
2. Select Pass Through from the menu.
The screen adjusts, but no additional fields display.
3. Click the Apply button.

IPv6 Fixed

To set up an IPv6 Internet connection with a fixed IPv6 address:

1. Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
2. Select Fixed from the menu.
N300 Wireless Router WNR2000v4
Advanced Settings
111
Step 3 through Step 5 of
IPv6 Auto