Toshiba D-R2SU Service Manual page 14

1-2-4. Front (R), Front (L), Front (Jack) PC Board
1. Remove the front panel. (Refer to item 1-1-2.)
2. Disconnect the flexible cable (1), then peel off the tape (2).
3. Remove four screws (3), then remove the stay (4).
4. Remove eight screws (5) and the screw (6), then remove the front (R) PC board (7) and front (L) PC board (8).
5. Remove four screws (9), then remove the front (Jack) PC board (10).
Front (L) PC board (8)
Screw (6)
Screws (9)
Front (Jack)
PC board (10)
Screws (3)
Tape (2)
Flexible cable (1)
Stay (4)
Screws (5)
Front (R) PC board (7)
Fig. 2-1-11