Emptying The Recovery Tank - Hoover SteamVac Y Series User Manual

8
A
9
10
D
11
12
6
Unplug carpet cleaner from electrical outlet.
 An automatic shut-off device prevents the cleaner
B
C
 Press button (C) and remove tank (Fig. 9).
 Release latches (D) on tank cap and remove cap (Fig.
D
 Empty tank.
 Replace cap (Fig. 11). Secure both latches (D) (Fig. 10).
 Remove any debris that has collected on lint filter (E)
 Place bottom of tank onto cleaner. Pivot top of tank
E
E
Empty the recovery tank
from picking up more dirty water than it can hold in
the recovery tank.
You will know the tank needs to be emptied --
• The amount of dirty water has reached the full line
(A).
• When the motor sound rises in pitch.
• You do not see dirty solution coming up through
the nozzle.
• The float (B) inside the recovery tank has risen to
the top of the tank (Fig. 8).
10).
For full suction, it is important that the recovery
tank cap is properly secured before cleaning.
on cleaner body (Fig. 12 and inset).
and snap in place (Fig. 12).