D-Link AirPremier DWL-3200AP User Manual page 76

DWL-300AP User's Manual
2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To check
this connection: Right-click on the Local Area Connection icon in the taskbar> select View
Available Wireless Networks. The Connect to Wireless Network screen will appear. Please
make sure you have selected the correct available network, as shown in the illustrations below.
 Check that the IP address assigned to the wireless adapter is within the same IP address
range as the access point and gateway. Since the DWL-3200AP has an IP address of
192.168.0.50, wireless adapters must have an IP address in the same range, e.g., 192.168.0.x.
Each device must have a unique IP address; no two devices may have the same IP address.
The subnet mask must be the same for all the computers on the network.) To check the IP
address assigned to the wireless adapter, double-click on the Local Area Connection
icon in the taskbar > select the Support tab and the IP address will be displayed. Please
refer to Checking the IP Address in the Networking Basics section of this manual.)
 If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the
appropriate section in Networking Basics. If you are entering a DNS Server address you
must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable
router, you will not need to assign a static IP address. See Networking Basics: Assigning
a Static IP Address.)
D-Link Systems, Inc.
Troubleshooting
76