D-Link AirPremier DWL-3200AP User Manual page 22

DWL-300AP User's Manual
Channel: 6 is the default channel. All devices on the network must share the
Auto Channel
Remote AP MAC
WDS Site
Authentication: Open System
Cipher Type:
Group Key Update Interval: Select the interval during which the group key will be valid. The
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in
D-Link Systems, Inc.
same channel. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
Enabling this feature automatically selects the channel that will
Scan: provide the best wireless performance. This feature is not supported
in WDS with AP mode.
Select Enable or Disable. (Enable this feature to auto-select the
Address:
channel for best wireless performance.)
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS Server required).
When you select WPA-Personal, WPA2-Personal, or
WPA-Auto-Personal you must select AES or AUTO from the
pull-down menu.
default value of 1800 is recommended.
the corresponding field.
Using the Configuration Menu