Printer; Drawer; Battery - Sharp XE-A40S Service Manual

[6] PRINTER

1. PRINTER
• Part number : PR-45M II
• NO. of station : 2 (Receipt and journal)
• Validation : No
• Printing system : Line thermal
• No. of dot : Receipt
Journal
• Dot pitch : Horizontal
Vertical
• Font : 10 dots (W) x 24 dots (H)
• Printing capacity : Receipt
Journal
• Character size : 1.25mm (W) x 3.0mm (H) at 10 x 24 dots
• Print pitch : Column distance
Row distance
• Print speed : Approximate 50mm/s (13.3 lines/sec)
• Paper feed speed : Approximate 40mm/s
(Manual feed)
• Reliability : Mechanism MCBF 5 million lines
Head life 12.5 million characters
(at 4 dots/1 character/1 element)
• Paper end sensor : Set up (Receipt and journal)
• Cutter : Manual
• Near end sensor : No
* PR-45M II is not equipped with the gear cover. It is the only differ-
ence of PR-45M II and PR-45M. When servicing PR-45M II printer
unit, the manual of PR-45M will serve as a reference.
2. PAPER
: 44.5 m ± 0.5mm in width
• Paper roll
dimension
Max. 80mm
• Paper quality : (Journal/Receipt)
High-quality paper
paper thickness: 0.06 to 0.08mm
Nihon seisi thermal
paper
Oji thermal paper
3. LOGO STAMP
• No
4. CUTTER
• Method : Manual
5. PRINTING AREA
Receipt & Journal
Number of themal head heater elements 864 dots
(688dots)
36
(288dots) (112dots)
0.125
44.5 0.5
Receipt
288 dots
288 dots
0.125mm
0.125mm
max. 24 characters
max. 24 characters
1.5mm
3.75mm
in diameter
: TF50KS-E
: PD150R,PD160R
14 36
(288dots)
4 4.5
44.5 0.5
Journal (units;mm)

[7] DRAWER

1. OUTLINE
• Standard equipment: Yes
• Max. number of additional drawers: 0
• The drawer consists of:
1) Drawer box (outer case) and drawer
2) Coin case
3) Money case
4) Lock (attached to the drawer)
2. SPECIFICATION
2.1. DRAWER BOX AND DRAWER
Model name of the drawer box SK423
Size
color
Material
Bell
Release lever
Drawer open sensor
Separation from the main unit
2.2. MONEY CASE
Separation from the drawer
Separation of the bill compartments from the coin
compartments
Bill separator
Number of compartments
2.3. LOCK (LOCK KEY : LKGIM7331BHZZ)
• Location of the lock: Front
• Method of locking and unlocking:
To lock, insert the drawer lock key into the lock and turn it 90
degrees counter clockwise.
To unlock, insert the drawer lock key and turn it 90 degrees clock-
wise.
• Key No: SK1-1

[8] BATTERY

1. MEMORY BACK UP BATTERY
Built-in battery : Rechargeable batteries, memory holding time
about 1 month (with fully charged built-in batteries,
at room temperature)
1 – 3
XE-A40S
420 (W) x 426 (D) x 114 (H) mm
16.5 (W) x 16.8 (D) x 4.5 (H) inches
Gray (PB-N8.0)
Metal
-
Standard equipment: located at the
bottom
-
-
Allowed
Allowed
Disallowed
5B/6C