Table of Contents
Advertisement
Dimensions
Base versions
Low plug-in base, AGK 4 104 1345 0
Design features:
Ten-pole (screw terminals), with additional earth terminals.
Cable entry either through the bottom of the base
(two knock-out holes), the front, from the right or left side
(total of five cable entries).
High plug-in base, AGK 4 104 9025 0
with removable front
(shaded area in the drawing)
Design features:
Ten-pole (screw terminals):
and
- two auxiliary terminals with markings 11 and 12
- two neutral terminals, wired to terminal 2 (neutral input)
- two earth terminals, with earthing lug for the burner
For cable entry:
two cable entries in the bottom of the base and four threaded knock-
out holes for cable glands Pg11, one on the right, one on the left,
and in the removable front.
High plug-in base, AGK 4 104 9169 0
Features as above, but without the removable front (shaded area in
the drawing is open).
Front, AGK 4 104 9112 0
As a separate item, suited for use with plug-in base AGK 4 104 9169
0 (can also be used with AGK 4 104 9025 0, shaded area in the
drawing).
8/8
Dimensions in mm
1998 Landis & Staefa Produktion GmbH
CC1N7781E
June 01, 1999
4 ,6
1 2 3 4 5
6 7 8 9 10
1 2 3 4 5
6 7 8 9 10
4
13 16
22
22
25
25
30
30
42,5
42,5
4 ,5
1 2 3 4 5
6 7 8 9 10
N
1 1
1 2
10,5
1 6
22
22
4 ,5
25
2 5
3 0
3 0
4 5
45
13
31
31
90
16,2
7781m02/1198
13
11 0
77 81m0 1/119 8
Landis & Staefa Division
4
4
Hide quick links:
Advertisement
Table of Contents
