5-1. ADJUSTMENT PREPARATIONS
For details of the adjustment remote commander, refer to "5-4.
SERVICE MODE".
1-1.
PREPARATIONS BEFORE ADJUSTMENT
1-1-1. List of Service Tools
• Oscilloscope
• Digital voltmeter
Ref. No.
Adjustment remote commander (RM-95 upgraded).
J-1
(Note 1)
J-2
CPC-13 jig
J-3
Multi CPC jig
Note 1: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
J-1
J-2
• Regulated power supply
• Pattern generator
Name
J-3
Fig. 5-1-1.
• Frequency counter
Parts Code
J-6082-053-B
J-6082-443-A
For adjusting the video section
J-6082-311-A
For adjusting the LCD block
5-3
GV-D1000/D1000E
• Monitor TV
Usage