Transmittable Documents - Sharp AM-900 Service Manual

[3] Transmittable documents

1. Document Sizes
Normal size Width
Length
(Max.)
LETTER
(Min.)
size
148mm
148mm 216mm
[Normal size]
Use document carrier sheet for smaller documents.
• With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
10 sheets
Paper weight 21.5 lbs.
(80 g/m
Paper thickness (ref.) 0.1 mm
Paper size LGL (216 mm x 355.6 mm)
A4 (210 mm x 297 mm)
LTR (216 mm x 279 mm)
Feeder capacity A4/LTR: 10 sheets max.
LGL
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain
pen, ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine
can also be transmitted.
• Diazo copy (blue print)
• Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink can-
not be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5.8" - 8.5"(148 - 216 mm)
5.8" - 11"(148 - 279 mm)
(Max.)
600mm
279mm
216mm
[Special size]
1 sheet(Manual)
14 lbs. ~ 42 lbs.
2) 2 2)
(52 g/m ~ 157g/m
0.1 mm ~ 0.18mm
: 1 sheet max.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 20 pages
Special size: single sheet only (manual feed)
NOTE: • When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in feeder
is being scanned.
• Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
• Readable width
8.2" (208mm), max
• Readable length
This is the length of the document sent minus 0.16" (4mm) from the
top and bottom edges.
1 – 3
AM-900U
Readable width
0.16" (4mm)
Readable length
0.16" (4mm)