Refer To The Service Manual Of Fo-4400U - Sharp FO-DC600 Service Manual

SW90 No. 8 Reserved
Set to "1".
SW91 No. 1 ~ No. 8 Reserved
Set to "0".
SW92 No. 1 Reserved
Set to "0".
SW92 No. 2 Reserved
Set to "1".
SW92 No. 3 Waiting time after dialing
The set up of the call time of the auto dial.
90 sec. or depends on each country's specifications.
SW92 No. 4 Show receiver's name
This switch is used to note the receiver's name on the transaction report
and activity report. When this switch is set to "0", the receiver's dial
number is printed on the report.
SW92 No. 5 ~ No. 8 Reserved
Set to "0".
SW93 No. 1 ~ No. 8 Reserved
Set to "0".
SW94 No. 1 ~ No. 8 Reserved
Set to "0".
SW95 No. 1 ~ No. 4 Reserved
Set to "0".
SW95 No. 5, No. 6 Reserved
Set to "1".
SW95 No. 7 Reserved
Set to "0".
SW95 No. 8 Reserved
Set to "1".
SW96 No. 1 ~ No. 3 Network print : Auto continue
When the paper of designated size runs out whilst printing, the unit will
pause until the paper of the selected size is supplied. This function
allows to continue printing with the paper of alternative size, if the paper
of designated size was not supplied even after a period of time. This SW
is for setting ON/OFF of this function, and the ON waiting time.
SW96 No. 4 Network print : Default paper size
When the selected paper size was other than the size that can be set in
this unit (LTR, LGL, A4), an alternative paper size can be set with this
SW.
SW96 No. 5 ~ No. 7 Reserved
Set to "0".
SW96 No. 8 Reserved
Set to "1".
SW97 No. 1 ~ No. 8 Reserved
Set to "0".
SW98 No. 1 ~ No. 8 Reserved
Set to "0".
SW99 No. 1 Reserved
Set to "0".
SW99 No. 2, No. 3 Reserved
Set to "1".
SW99 No. 4 ~ No. 6 Reserved
Set to "0".
SW99 No. 7, No. 8 Reserved
Set to "1".
[3] Troubleshooting

Refer to the service manual of FO-4400U.

[4] Error code table
Refer to the service manual of FO-4400U.
[5] Overseas communication mode
Refer to the service manual of FO-4400U.
[6] Administrator mode in the personal book
function
Refer to the service manual of FO-4400U.
2 – 35
FO-DC600U