Additional Information
Troubleshooting
If you have any problem while viewing your projection TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.
Symptom
• The connection is
Snowy picture
loose or the cable is
damaged.
• Channel presetting
is inappropriate or
incomplete.
Noisy sound
• The antenna type is
inappropriate.
• The antenna
direction needs
adjustment.
• Signal transmission
is low.
Distorted picture
• Broadcast signals
are too strong.
Noisy sound
• The TV system
Good picture
setting is
inappropriate.
Noisy sound
• The sound of the right
picture is selected
when TWIN pictures
are displayed.
01GB10ADD-p65
Possible cause
• Check the antenna cable and
connection on the projection TV, VCR
and on the wall.
• Display the "CH PRESET" menu
under the "SETUP" menu and select
"MANUAL PROGRAM" to preset
the channel again.
• Check the antenna type (VHF/UHF).
Contact a Sony dealer for advice.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
• Try using a booster.
• Display the "CH PRESET" menu
under the "SETUP" menu and select
"MANUAL PROGRAM".
Then, select "
• Turn off or disconnect the booster if it
is in use.
• If the sound of all the channels are noisy,
display the "CH PRESET" menu under
the "SETUP"menu and select "AUTO
PROGRAM" to preset the channels again.
• If the sound of some channels is noisy,
select the channel, then display the
"CH PRESET" menu under the
"SETUP"menu and select the appropriate
TV system ("TV SYS").
• Press
49
Sony KP-FX53/FX43 M61 (GB/FR/CT/CS/PR/AR).4-090-470-21 (1)
Solutions
SENS: LOW".
or
.
Additional Information
02.8.21, 5:25 PM
Page
6
45
–
–
–
46
–
43
45
21
continued
49