Table of Contents
Advertisement
Additional Information
Troubleshooting
If you have any problem while viewing your projection TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.
Symptom
• The connection is
Snowy picture
loose or the cable is
damaged.
• Channel presetting
is inappropriate or
incomplete.
Noisy sound
• The antenna type is
inappropriate.
• The antenna
direction needs
adjustment.
• Signal transmission
is low.
Distorted picture
• Broadcast signals
are too strong.
Noisy sound
• The TV system
Good picture
setting is
inappropriate.
Noisy sound
• The sound of the right
picture is selected
when TWIN pictures
are displayed.
Possible cause
• Check the antenna cable and
• Display the "CHANNEL SETUP"
• Check the antenna type (VHF/UHF).
• Adjust the antenna direction. Contact
• Try using a booster.
• Display the "CHANNEL SETUP"
• Turn off or disconnect the booster if it
• If the sound of all the channels are noisy,
• Press
Solutions
connection on the projection TV, VCR
and on the wall.
menu under the "SETUP" menu and
select "ADD/ERASE" to preset the
channel again.
Contact a Sony dealer for advice.
a Sony dealer for advice.
menu under the "SETUP" menu and
select and select "
SENS: LOW".
is in use.
display the "CH PRESET" menu under
the "SETUP"menu and select "AUTO
PROGRAM" to preset the channels again.
or
.
Page
6
61
–
–
–
61
–
58
25
continued
Additional Information
63
Advertisement
Table of Contents
