Adjusting The Volume; Monitor Panel Operations - Open/Tilt - JVC KW-AV70BT Instructions Manual

Adjusting the volume

To adjust the volume
• On the source control screen, you can also adjust the
volume by moving your finger on the touch panel as
illustrated.
Decrease
To attenuate the sound
The ATT indicator lights up.
To cancel the attenuation, press [
Caution on volume setting:
Digital devices (CD/SD /USB/iPod) produce very
little noise compared with other sources. Lower
the volume before playing these digital sources to
avoid damaging the speakers by sudden increase
of the output level.
(00 to 50)
Increase
] again.
Monitor panel operations —
Open/Tilt
1
On the source control screen:
2
Opens the monitor panel.
[ Open]
[ Eject] Ejects the disc.
Closes the monitor panel.
[ Close] • Do not place your finger
Tilts the monitor panel.
[ Tilt +]
[ Tilt –]
[Detach] To detach the monitor panel.
(
Goes back to the current source
[ ]
screen.
• When the ACC is off, you can also eject the disc. Hold
/MENU to display the <Open/Tilt> screen.
9
behind the monitor panel.
page 5)
(Hold)