JVC KW-V250BT Instruction Manual

JVC KW-V250BT Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KW-V250BT:

Advertisement

MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
KW-V250BT
KW-V25BT
(Region 1 – DVD Region Code 1 Area)
KW-V350BT
KW-V350BT
This instruction manual is used to describe the models listed above. Model availability and features (functions)
may differ depending on the country and sales area.
(Region 1 – DVD Region Code 1 Area)
(Region 1 – DVD Region Code 1 Area)
(Region 4 – DVD Region Code 4 Area)
ENGLISH
B5A-2613-10 (K/R)

Advertisement

Table of Contents
loading

Summary of Contents for JVC KW-V250BT

  • Page 1 ENGLISH MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL KW-V250BT (Region 1 – DVD Region Code 1 Area) KW-V25BT (Region 1 – DVD Region Code 1 Area) KW-V350BT (Region 1 – DVD Region Code 1 Area) KW-V350BT (Region 4 – DVD Region Code 4 Area) This instruction manual is used to describe the models listed above.
  • Page 2 • Do not expose the monitor to direct sunlight. – it may obstruct the steering wheel and gearshift • Do not operate the touch panel using a ball-point For KW-V250BT/KW-V25BT/KW-V350BT Region 1: lever operations. pen or similar tool with a sharp tip.
  • Page 3 Important Notice Important Notice For KW-V250BT/KW-V25BT/KW-V350BT Region 1: For KW-V250BT/KW-V25BT/KW-V350BT Region 1: This transmitter must not be co-located or operated in FCC WARNING conjunction with any other antenna or transmitter. CAUTION This equipment may generate or use radio This equipment complies with FCC/IC radiation frequency energy.
  • Page 4: Table Of Contents

    Information ..................34 Turning on the power ..............3 Preparation ..................34 Turning off the power ..............4 Illustrations of KW-V250BT/KW-V25BT are mainly Connection..................34 Turning off the AV source ............4 used for explanation. Bluetooth mobile phone ............36 Turning off the screen and button illumination ..4...
  • Page 5: Component Names And Operations

    Component Names and Operations Component Names and Operations Basic Operations Basic Operations KW-V250BT/KW-V25BT KW-V350BT How to reset your unit If the unit fails to operate properly, press the reset button. KW-V250BT/KW-V25BT KW-V350BT button • (Press) Turns on the power. 1 Reset button •...
  • Page 6: Turning Off The Power

    – to decrease. • Holding + increases the volume continuously to Turning off the AV source On the pop-up short-cut menu level 15. (only for KW-V250BT/KW-V25BT) Display the source/option selection Attenuating the sound (only for KW-V350BT) Display the pop-up short-cut menu.
  • Page 7: Getting Started

    Enter make the image on the screen easier to see. Clock Finish • Under 0° (Initial)/5°/10°/15°/20° Synchronize Radio Data System E.g. Initial settings screen for KW-V250BT/ AM10 Clock settings KW-V25BT Reset Once completed, Home screen appears. Display the Home screen.
  • Page 8: Various Screens And Operations

    Plays a Bluetooth audio player. 4 Displays the <Clock> screen. • You can customize the Home screen. (Pages 7 [Spotify] Switches to the Spotify application. 5 Only for KW-V250BT/KW-V25BT: Displays the and 45) [Pandora]*1 Switches to the Pandora broadcast. current playing source control screen.
  • Page 9: Source Control Screen

    1 Playback source or media type Source control screen Customizing the Home screen 2 Picture/artwork (shown if the file contains the For KW-V250BT/KW-V25BT You can perform the playback operation from the information) See <Home Customize> on page 45. source control screen during playback.
  • Page 10 • The following explanations state the operation keys folder/track/audio file/video file). While displaying the source control screen, you can for KW-V250BT/KW-V25BT, unless stated otherwise. • (Hold) Reverses/forwards search. jump to another screen by touching the operation • The appearance of the operation keys may differ, •...
  • Page 11: List/Setting Screen

    2 While playing a video: Displays the source control To close the pop-up menu the first letter you want to search for. screen. • KW-V250BT/KW-V25BT: Press FNC on the monitor • For “USB” source, you can switch between the While playing an audio file: Displays the playback panel.
  • Page 12: Disc

    Settings for disc playback • Available items shown on the <DISC Mode> screen Playback operations E.g. Inserting a disc for KW-V250BT/KW-V25BT differ depending on the type of disc/file being Audio playback information and key played back.
  • Page 13: Video

    4:3 PS Select the initial subtitle language or turn subtitles off (Off). (Initial: English) E.g. Video playback source control screen for <Audio Language>*1 KW-V250BT/KW-V25BT Select the initial audio language. (Initial: English) <File Type>*2 <Dynamic Range Control> 1 Media type Select the playback file type when a disc contains...
  • Page 14 • <Tint>: Adjusts the tint (−10 to +10). Touch [ Aspect] to select the aspect • <Sharpness>: Adjusts the sharpness ratio. E.g. Video menu control screen for KW-V250BT/ (−2 to +2). <Full>*2: For 16:9 original pictures KW-V25BT Selects the audio type.
  • Page 15: Usb

    3 Touch [Enter] to confirm. To delete the last entry, touch [DIR/ CLR]. E.g. Video menu control screen for KW-V250BT/ [Return] Displays the previous screen or menu. KW-V25BT * You need to stop playback to deactivate the PBC function when playing a VCD with PBC activated.
  • Page 16 File type Audio E.g. USB list screen for KW-V250BT/KW-V25BT Select an item in each layer until you reach and E.g. USB source control screen for KW-V250BT/ <Screen Ratio> select the desired file. KW-V25BT Select the monitor type to watch a wide screen Selecting a folder/track using alphabet picture on the external monitor.
  • Page 17: Android

    30-pin Lightning model connector model (commercially available) (commercially available) USB cable (commercially available) E.g. Android source control screen for KW-V250BT/ KW-V25BT KW-V250BT/KW-V25BT: On the monitor panel Touching the operation keys performs the following 30-pin to USB cable actions:...
  • Page 18: Tuner

    Playback information on the source control connection method Album Artist 000000003 screen Songs Artist 000000004 See <Smartphone Setup> on page 47 for more KW-V250BT/KW-V25BT Podcasts Artist 000000005 information. Select an item in each layer until you reach and Tuner Playback operations select the desired file.
  • Page 19 2 Text information • The following explanations state the operation keys [PTY]* (For FM RBDS features) for KW-V250BT/KW-V25BT, unless stated otherwise. • Touching [ ] scrolls the text if not all of the text Enters PTY search mode. • The appearance of the operation keys may differ, is shown.
  • Page 20: Siriusxm® Satellite Radio

    To hide the window: Touch [ ] or [ Rear panel Tuner AM FM1 (Hold) E.g. Tuner source control screen for KW-V250BT/ KW-V25BT The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected. ENGLISH...
  • Page 21 SiriusXM 8 Replay time bar for replay mode A confirmation message appears. Touch [Return]. • Black: The remaining capacity • Red (for KW-V250BT/KW-V25BT) / Blue (for KW-V350BT): The amount of buffered contents 9 Signal strength indicator p Seek mode indicator...
  • Page 22 (Hold) [SEEK] Changes the seek mode for [CH Select a category ( ), and then select a channel ( E.g. SiriusXM source control screen for KW-V250BT/ • SEEK1 (Initial): Skips to another KW-V25BT Channel List available channel. Channel • SEEK2: Skips to another preset...
  • Page 23 To hide the window: Touch [ ] or [ • SmartFavorites is available only when you connect E.g. Replay operation keys window for KW-V250BT/ an SXV200 or later SiriusXM Connect Vehicle Tuner. KW-V25BT Select “SEEK2” as the seek mode to jump •...
  • Page 24 SiriusXM® Satellite Radio SiriusXM® Satellite Radio For teams Content Alert TuneStart™ Display the <Alert Team Select> screen. When you select a SmartFavorites channel, you can The unit informs you when receiving the content you On the source control screen, touch as follows: listen to the current song from the beginning.
  • Page 25 SiriusXM® Satellite Radio SiriusXM® Satellite Radio To delete the registered items: Touch and hold the Selecting items for Content Alert Activating Content Alert item you want to delete in step 2. You can select items (artists/songs/teams) from the For artists/songs/teams The [ ] icon and a check mark appear beside the registered items on the list to inform you once the unit selected item.
  • Page 26 SiriusXM® Satellite Radio SiriusXM® Satellite Radio Then, on the <SiriusXM Mode> screen, touch as Select the desired mode for <Parental Switching to registered content follows: Control>. When an artist/song/team registered for Content Alert <Parental Code> : [Change] [OFF] Deactivates parental control. is being broadcasted, an alert appears on the screen.
  • Page 27: Pandora

    Pandora® Pandora® SiriusXM® Satellite Radio SiriusXM® Satellite Radio (Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1) Select a category ( ), then a channel ( Select a category ( ), then a channel ( A check mark appears beside the selected channel. A check mark appears beside the selected channel.
  • Page 28 • Via USB input terminal: Connect iPhone/iPod touch • The following explanations state the operation keys with the cable. (Page 15) KW-V350BT for KW-V250BT/KW-V25BT, unless stated otherwise. – For Lightning models: Use KS-U62 (optional • The appearance of the operation keys may differ, accessory).
  • Page 29: Iheartradio

    Pandora® Pandora® (Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1) Select a station from the list. On the station list: Displays the list selection screen. iHeartRadio is a free, all-in-one digital radio service that Pandora Thumbs down to the current track and...
  • Page 30 Operation keys on source control screen For iPhone/iPod touch • The following explanations state the operation keys • Via USB input terminal: Connect iPhone/iPod touch for KW-V250BT/KW-V25BT, unless stated otherwise. KW-V350BT with the cable. (Page 15) • The appearance of the operation keys may differ, –...
  • Page 31 iHeartRadio iHeartRadio [Familiar] Distributes well-known tracks. Editing the <Favorites> list Displays the <Station Search> screen or [Mixed] Distributes a mix of artists and Display the <Station Edit> screen. the station list. track names. On the source control screen, touch as follows: Dislikes the currently playing content.
  • Page 32: Spotify

    Playback information and key operation old favorites to the latest hits. Just choose the music Play to find and install the most recent version. KW-V250BT/KW-V25BT you love, or let Spotify surprise you. • For iPhone/iPod touch: Search for “Spotify” in the...
  • Page 33 – You cannot thumb up or down while playing tracks Creates a new station. in a playlist. *1 For KW-V250BT/KW-V25BT/KW-V350BT Region 1: Purchase Switches the device on <Smartphone – Personalizing stations may not be available optional remote controller, RM-RK258.
  • Page 34: Other External Components

    You can also display the picture from the rear view camera manually without shifting the gear to the Select an AV-IN name reverse (R) position. For KW-V250BT/KW-V25BT: On the pop-up short-cut VIDEO Mode menu, touch as follows: VIDEO AV-IN Name...
  • Page 35: Using An External Component Via Ads Adapter

    Other External Components Other External Components [Satellite Displays the control screen of the Using an external component via ADS Operations while the camera screen is Radio] satellite radio source provided for the adapter—Maestro displayed vehicle. (Only for KW-V350BT Region 1) To adjust the picture [Media Displays the control screen of the...
  • Page 36: Bluetooth

    Pairing allows Bluetooth devices to communicate with operations such as dialing numbers, using the phone each other. Search for the unit (“JVC KW-V”) from your book, etc. When you perform these operations, stop • The pairing method differs depending on the Bluetooth device.
  • Page 37 • To delete the last entry, touch [Clear]. Paired Device List • To delete the PIN code, touch and hold [Clear]. Device Name 1 Search for the unit (“JVC KW-V”) from your Device Name 2 Bluetooth device. Device Name 3...
  • Page 38: Bluetooth Mobile Phone

    <Connect Ready>: A connection can be established. On the Home screen, touch as follows: <Disconnecting>: Disconnection is in progress. During a call... For KW-V250BT/KW-V25BT: <Disconnected>: No connection is established. • When a Bluetooth mobile phone is connected, the Device Name 1...
  • Page 39 (page display) of the phone • If the unit cannot find the target, “Please speak For KW-V250BT/KW-V25BT: book shown on the main unit. into the microphone” appears. Touch [Start], then say the name again.
  • Page 40: Bluetooth Audio Player

    Bluetooth audio player method ( ), then select a contact ( ) to preset. JVC Streaming DJ When “BT Audio” is selected as the source, you can Device Name 1 Device Name 2 Name 1 connect up to five Bluetooth audio devices at the...
  • Page 41: Bluetooth Settings

    Select an item in each layer until you reach and Show the device name of this unit to be shown on select the desired file. the Bluetooth device — JVC KW-V. <Device Address> Show the device address of the unit.
  • Page 42: Settings

    Time Alignment Enter screen. Adjust the sound as follows: • Flat (Initial)/Hard Rock/Pop/Hip Hop/R&B/Jazz/ Classical/drvn 3/drvn 2/drvn 1/User <Q factor> E.g. Audio settings screen for KW-V250BT/ Adjusts the width of the frequency. KW-V25BT Equalizer SRC Name Preset Q factor Flat •...
  • Page 43 On the monitor panel, press the following buttons • OFF (Initial)/ON Adjusts the front and rear speaker output balance. at the same time: When using a two-speaker system, set the fader to the • For KW-V250BT/KW-V25BT: and volume – <Space Enhancement>*1 center (0). • For KW-V350BT: Virtually enhances the sound space using the Digital •...
  • Page 44 Settings Settings <Time Alignment> Adjust the crossover frequency of the Setting the speakers and crossover selected speaker. Make fine adjustments to the delay time of the speaker frequency • Adjustable items vary depending on the selected output to create a more suitable environment for your Select a car type ( ), select the location speaker type/speaker size/crossover settings.
  • Page 45: Display Settings

    Then, on the <Settings> screen, touch [Display]. Settings 1.4 ft Dimmer Audio Auto 2.45 ft User Customize Display Enter OSD Clock Input 4.9 ft +2.45 ft Demonstration System Scroll Once E.g. Display settings screen for KW-V250BT/ +0 ft KW-V25BT ENGLISH...
  • Page 46 Settings Settings For KW-V250BT/KW-V25BT • You can also adjust the color yourself. Touch For KW-V350BT 1 Change the background design 1 Change the background design [Adjust] to display the color adjustment screen, then Display the background design selection screen (1), adjust the color.
  • Page 47 • You can also adjust the color yourself if [User] Touching [ ] scrolls the text regardless of this setting. is selected. Touch [Edit] to display the color E.g. Image adjustment screen for KW-V250BT/ adjustment screen, then adjust the color. The <Home Customize> KW-V25BT adjustment is saved on [User].
  • Page 48: Input Settings

    Adjusts blackness. System • –10 to +10 (Initial: 0) Initialize <Video Output> E.g. Input settings screen for KW-V250BT/ Select the color system of the external monitor. Make sure that A and B are horizontally parallel, and KW-V25BT • NTSC (Initial)/PAL that C and D are the same length.
  • Page 49: System Settings

    Select the connection method ( ), then connection method: Select the device ( confirm the selection ([OK] or [Next]) ( E.g. System settings screen for KW-V250BT/ then press [OK] ( ) to connect. If [iPod/iPhone] is selected in step 1: KW-V25BT •...
  • Page 50 Settings Settings • To reset the touch position, touch [Reset]. <Bluetooth Setup> <DivX(R) VOD> • To cancel the current operation, touch [Cancel]. Configure settings for using a Bluetooth device, such (Only for KW-V350BT Region 4) as connection and other general operations. For This unit has its own Registration Code.
  • Page 51: Key Settings

    • A confirmation message appears. Touch [Yes]. If the update has been completed successfully, – To cancel the initialization, touch [No]. • For KW-V250BT/KW-V25BT, you can also customize “Update Completed” appears, then reset the unit. (favorite) button. • Do not disconnect the USB device while updating.
  • Page 52: Remote Controller

    ) you want to display in Preparation KW-V350BT Region 4. the selected menu, then touch [ × ] to set • For KW-V250BT/KW-V25BT/KW-V350BT Region 1: Removing the battery sheet To use the remote controller, purchase optional Pull the battery sheet out from the remote controller remote controller, RM-RK258.
  • Page 53: Basic Operations

    If the battery compartment does not close securely, *1 The search method differs according to the selected seek mode. automatically. (Press)*1 stop using the product and keep it away from *2 Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. – Searches for stations manually. children. (Hold)*1 If you think batteries might have been swallowed or •...
  • Page 54: Jvc Remote App

    Remote Controller JVC Remote APP Before installation WARNINGS JVC Remote is an application that connects and • DO NOT connect the ignition wire (red) and the Precautions on installation and connection controls compatible JVC car receivers via Bluetooth® battery wire (yellow) to the car chassis (ground), you •...
  • Page 55 Installation and Connection Installation and Connection • If your car’s ignition does not have an ACC position, Parts list for installation Installation procedure connect the ignition wires to a power source that Note: This parts list does not include all the package can be turned on and off with the ignition key.
  • Page 56: Installing The Unit

    π / [ SW: Woofer preouts Car bracket Note: Select the appropriate screws (supplied) for the *1 Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. mounting bracket. *2 Only for KW-V350BT Region 1. *3 Only for KW-V350BT Region 4. 1 Expansion port for connecting SiriusXM Connect...
  • Page 57: Wiring Connection

    Installation and Connection Installation and Connection Wiring connection *1 Only for KW-V250BT/KW-V25BT/KW-V350BT 10 A fuse Region 1. “ *2 Only for KW-V350BT Region 1. *3 Only for KW-V350BT Region 4. *4 Only for KW-V350BT Region 1/KW-V350BT Region 4. Connect the antenna cord to the antenna terminal...
  • Page 58: References

    References References • This unit can play back files that meet the conditions – AAC files copy-protected with FairPlay (except Maintenance below: those stored on an iPod/iPhone). Cleaning the unit – Bit rate: – Files which have data such as AIFF, ATRAC3, etc. MP3: 8 kbps –...
  • Page 59 – While playing a DVD Video, DTS sound cannot be Fiji Latin conditions. reproduced or emitted from this unit. Faroese Lingala * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. Frisian Laothian Irish Lithuanian ENGLISH...
  • Page 60 References References • Electrostatic shock at connecting a USB device may Latvian, Lettish Samoan About USB playback cause abnormal playback of the device. In this case, MG Malagasy Shona Important disconnect the USB device then reset this unit and Maori Somali Make sure all important data has been backed up to the USB device.
  • Page 61: Troubleshooting

    In The unit does not work at all.  Finalize the discs with the component which you this case, visit the following JVC web site:  Reset the unit. (Page 3) <http://www.jvc.net/cs/car/> used for recording.
  • Page 62 Troubleshooting Troubleshooting DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC discs The source does not change to “USB” when you iPod/iPhone cannot be played back. connect a USB device while listening to another No sound comes out of the speakers.  Record the tracks using a compatible application source or “USB Device Error”...
  • Page 63 Call 1-866-635-2349 to subscribe. “Failed to save your thumb rating” appears.  Thumb-up/down is prohibited. * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. “SXM Subscription Updated – Press Return to “No Station” appears. Continue” appears.  Your subscription has been updated. Press the ...
  • Page 64 Echo or noise occurs.  Adjust the microphone unit position. * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. “Pick Up Error” appears.  Adjust the echo volume or noise reduction volume.  The unit has failed to receive a call.
  • Page 65: Specifications

    Specifications Specifications Total Harmonic 0.01% (1 kHz) Monitor section Bluetooth section Distortion Picture Size (W × H) 6.2 inches (diagonal) wide Technology Bluetooth V3.0 Signal to Noise Ratio 90 dB 137.5 mm × 77.2 mm Frequency 2.402 GHz to 2.480 GHz Dynamic Range 90 dB (5-7/16"...
  • Page 66 External Audio Input 1 Vp-p/75 Ω DSP section FM tuner section Level (mini jack) Equalizer 13 Band Frequency Range KW-V250BT/KW-V25BT/ Video Output Level 1 Vp-p/75 Ω KW-V350BT Region 1: Band Frequency (Hz) (BAND1 – 13): (RCA jack) 87.9 MHz to 107.9 MHz 62.5/100/160/250/400/630/...
  • Page 67: Trademarks And Licenses

    DivX, LLC and are used under license. the following disclaimer. use of such marks by JVC KENWOOD Corporation is – Redistributions in binary form must reproduce the under license. Other trademarks and trade names are those of their respective owners.
  • Page 68 For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website: <http://www.jvc.net/cs/car/> © 2018 JVC KENWOOD Corporation 0618DTSMDTJEIN...

This manual is also suitable for:

Kw-v25btKw-v350bt

Table of Contents