JVC KW-AV70BT Instructions Manual page 87

KW-AV708T
iPhone/iPod users:
PLEASE READ THIS BEFORE USING YOUR NEW UNIT
You have two options when connecting an
iPhone or an iPod to your new unit:
• Option 1 (Default Setting):
Using the optional JVC KS-U30
Your unit is pre-set from the factory to allow
audio and video playback when you connect
your iPhone or iPod using the optional JVC KS-U30
cable (Sold Separately).
U30, simply connect your iPhone or iPod using
this optional cable.
• Option 2:
If you wish to connect your iPhone or iPod with
white 30-Pin iPod USB Cable (this is the white
cable that is supplied with your iPhone or
you will need to follow the simple steps below to
audio
assure playback:
Please go to [AV Menu]>> Select [AV Off]>>
Select [AV MENU]>> Select [Settings]>>
[Input], then select [AV-IN] at "AV Input" Menu.
Important Notice:
When using white 30-Pin iPod USB Cable, audio
signal does not come through via USB ifyou
"iPod'~
You must select "AV-IN" when using
select
your white 30-Pin iPod USB
If you purchased the
iPod),
Cable.
Setting <AV Input> for iPod/iPhone playback
• Make sure that"AV
CD
KS-
®
Settings
• Fader/Balance
Off" is selected as the rear source.
Audio Display lnpu•
0/0
S"~tem