JVC KW-AV70BT Instructions Manual page 88

KW-AV60BTIKW-AV60/KW-ADV64BT
iPhone/iPod users:
PLEASE READ THIS BEFORE USING YOUR NEW UNIT
You have two options when connecting an
iPhone or an iPod to your new unit:
• Option (Default Setting):
1
Using the optional JVC KS-U30
Your unit is pre-set from the factory to allow
audio and video playback when you connect
your iPhone or iPod using the optional JVC KS-U30
cable (Sold Separately).
U30, simply connect your iPhone or iPod using
this optional cable.
• Option 2:
If you wish to connect your iPhone or iPod with
white 30-Pin iPod USB Cable (this is the white
cable that is supplied with your iPhone or
you will need to follow the simple steps below to
assure audio playback:
Please go to [AV Menu]>> Select [AV Off]>>
Select [AV MENU]>> Select [Settings]>>
[Input], then select [AV-IN] at "AV Input" Menu.
Important Notice:
When using white 30-Pin iPod USB Cable, audio
signal does not come through via USB if you
select "iPod'~
You must select
your white 30-Pin iPod USB Cable.
If you purchased the
iPod),
"AV-IN" when using
Setting <AV Input> for iPod/iPhone playback
G)
KS-
VMenu
Suausxm
l
IUNEi
ettin s
• Fade• /Balance
- - - - -
:: Prone
0
U~lt•
\u:t [JI\f U\r.
Aud~~- lnpu·~s~~~tem
Display
0/0
01,~
~
1f!r.d