Installing The Bearing Retainers; Assembling The Crankcase - Yamaha XVS13AWC Service Manual

1. Check:
• Oil nozzle
Damage/wear → Replace the oil nozzle.
• Oil passage
Obstruction → Blow out with compressed air.
EAS3D81031

INSTALLING THE BEARING RETAINERS

1. Install:
• Bearing retainers "1"
NOTE:
• Install each bearing retainer "1" with its "OUT"
mark "a" facing outward.
• Apply locking agent (LOCTITE®) to the
threads of the bearing retainer bolt.
Bearing retainer bolt
12 Nm (1.2 m·kg, 8.7 ft·lb)
LOCTITE®
a
1
EAS25700

ASSEMBLING THE CRANKCASE

1. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
2. Apply:
• Sealant
(onto the crankcase mating surfaces)
Yamaha bond No. 1215
90890-85505
(Three Bond No.1215®)
NOTE:
Do not allow any sealant to come into contact
with the oil gallery.
3. Install:
• Left crankcase
(onto the right crankcase)
NOTE:
Tap lightly on the left crankcase with a soft-face
hammer.
4. Install:
• Crankcase bolts (M10)
• Crankcase bolts (M6)
Crankcase bolt (M10)
36 Nm (3.6 m·kg, 25 ft·lb)
Crankcase bolt (M6)
10 Nm (1.0 m·kg, 7.2 ft·lb)
NOTE:
• Apply locking agent (LOCTITE®) to the
threads of the bolts "2".
• Tighten each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern.
• M10 × 110 mm bolts: "1"
• M6 × 120 mm bolts: "2"
• M6 × 80 mm bolts: "3"
5-71
CRANKCASE