Daewoo DP-42GM Service Manual page 69

(table 4.) HIC(Hybrid IC) Diode Tester Measure Value
+ : red, -: black
For the HIC inside Y-SUS PCB, PIN number starts from lower right when the PCB is attached
to the SET and looked from the front.
For the HIC inside X-SUS PCb, PIN number starts from upper left when the PCB is attached to
the SET and looked from the front.
40 OUT_H
39 OUT_H
38 OUT_L
37 OUT_L
36 NC
35 POWER_GND
34 POWER_GND
33 POWER_GND
32 POWER_GND
31 NC
30 EL1
29 EL1
28 NC
27 EC1
26 EC1
25 EC2
24 EC2
23 NC
22 EL2
21 EL2
PIN9~10 and PIN17, 20, 32~35 are shorted to GND.
PIN24~27 are shorted to each other.
PIN37~40 are shorted to each other.
-69-
1 V_SUS
2 V_SUS
3 V_SUS
4 V_SUS
5 NC
6 V_CC
7 V_DD
8 NC
9 SIG_GND
10 SIG_GND
11 NC
12 IN1
11 SD1
12 IN2
13 NC
14 IN3
15 SD2
16 NC
17 IN4
13 SD3