Sound Settings; Basic Functions - Grundig Accoro 102 Service Manual

Allgemeiner Teil / General Section
"
EXIT
16
1 - 18
SETTINGS
__________________________________________________________________________________

Sound settings

Changing the bass, treble and balance settings
1 Call up the Dialog Center using the »Menu« button.
2
Select the » « menu using the » « or » « button.
s
3 Select »Bass«, »Treble, or »Balance« using the »
4
Change the setting using the » « or » « button then confirm with »OK«.
5 Press the »Exit« button to end the setting.
Changing the internal bass boost
1 Use the »
boost« display apperars.
2 Use the » « or » « button to change the bass boost setting. The display
disppears after a few moments.
TV MODE
______________________________________________________________________________

Basic functions

Selecting channel positions
1 Select the channel positions directly using the »1...0« buttons.
After entering the first digit a dash appears next to the first digit. As long as
this dash is visible, you may enter the second digit for two-digit channel
positions.
2
Use the »
3
Select the channel positions AV1 – AV4 using the »AV« button
(indication on the picture screen »EXT1« – »EXT4«).
Adjusting the volume
1 Adjust the volume with » « or » «.
Switching the sound on/off
I/II
1 Use the » « button to switch the sound on and off (mute).
K
L
Subtitles
1
Display or suppress subtitles be pressing and holding down the»F« button
while pressing the »INFO« button (only possible if subtitles are offered for
the current programme).
Switching the clock time indication on/off
1 Display or suppress subtitles be pressing and holding down the»F« button
while pressing the »
(Only possible on programmes with teletext).
« or »
« button the switch the bass boost on and off. The »Bass
« or » « button to select the channel positions step by step.
« button.
ACCORO 102
« button.
21
GRUNDIG Service