Information Screen; Service Screen; Service Information; Chroma - Kenwood DDX6019 Service Manual

DDX6019/6029/6029Y/6039

Information screen

• Displays Serial No./each -com's version information/region
code/each status, etc.
S e r i a l : x x x x x x x x
S y s t e m : V 4 . X X X
A u d i o : V 4 . X X X
O S D R O M : V 2 . 0 1
B / E : V 9 . X X
F / E : V 3 . X X
T V B O X : V 4 . X X X
S p a n : –
*4: Displayed only when Tv Tuner Box is connected. When
the previous model TV tuner is connected, "– – – –" is dis-
played.
Key specification
Return: Move on to Test Mode Main screen.

Service screen

• Display and clear service information.
• Clear EEPROM Chroma data.
• Display and clear DC Offset detection information.
Page 1 screen
Power On
Init
Init DVD Play
Init CDDA Play
Init VCD Play
Init Other Play
Start
Page 2 screen
DVD Eject
Init
Init DVD Mecha/Read/Hot Error
DVD Other Error Last
DVD Other Error Before
Init
Mon. Open
Init Mon. Close
Start
24
TEST MODE
S e c u r i t y : O f f
D C O f f s e t : N o n e
R O M R – – – T y p e : *
R O M R – – – T y p e : * S p a n : –
R e g i o n : *
m a c r o v i s i o n : 1 . 0 0
R O M R X X X T y p e : *
*4
Return
h Serial

Chroma

h
Ready
h Clear
DCOffset
h
None
h
Clear
Page
Return
Press the [Page] key
to switch the screen
time
time
time
Page
Return
DVD error information
DVD Mecha/Read/Hot Error: When the error at the left is
detected, "DETECT" is displayed.
DVD Other Error Last: Display the latest (last) error infor-
mation (refer to the error code table).
DVD Other Error Before: Display the error information im-
mediately before the latest (last) error (refer to the error code
table).
Key specification
Init: Select the item to be initialized.
Start: By pressing and holding (for 1 sec. or longer) to
initialize the selected item's information.
Serial: Move on to the Serial No. manual input screen.
Clear (Chroma): Clear EEPROM Chroma data.
Clear(DC Offset): Clear EEPROM DC Offset information
data.
Page: Switch the Page 1 and Page 2 screens.
Return: Move on to Test Mode Main screen.
Adjustment procedure

Service Information

• Select the item to be initialized by pressing the [Init] key
(multiple items can be selected/selected items are high-
lighted).
• After selection is completed, press and hold the [Start] key
for 1 second or longer to initialize the displayed service in-
formation.
Chroma
• Chroma information is normally displayed as Ready and
Clr OK/NG when EEPROM data is cleared.
• When clearing, if moved on to the Chroma adjustment
screen without resetting, the previous data is maintained.
Cleared data is reflected after resetting.
DC Offset
• DC Offset detection information is not detected when None,
and detected when Detect.
• Detection information is cleared by [Clear] key.