Table of Contents
Advertisement
setup
When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you
enter one.
English and Numbers are available in the mode.
If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.
SYNC : In areas where the supply is at
60Hz(NTSC), 50Hz(PAL), you can
synchronize the output phase of
multiple cameras using the power
synchronization function (Line-Lock)
without using a synchronization signal generator.
-
INT : Internal Synchronization Type
-
L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
When the power is DC 12V, the SYNC menu is fi xed to the 'INT' mode.
MOTION DET :
This product has a feature that allows
you to observe movement of objects in
8 different areas on the screen, and the
words 'MOTION DETECTED' appear on
the screen when movement is detected.
You can monitor activity more effi cient.
When the SPECIAL menu screen
is displayed, press the Function Setup switch so that the arrow indicates
'MOTION DET'.
Set up the mode using the Function Setup switch.
-
SENSITIVITY :
You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small movement.
28_ setup
SYNC
▶ PHASE
IIIIIIIIIIIIIIIIIIIII
Press SET to Return
MOTION DET
1.SENSITIVITY
2.AREA MODE
3.SEL POS
4.XPOS
5.YPOS
6.FILL
SET
7.RETURN
0
AREA1
ON
L-TOP
3
4
Advertisement
Table of Contents
