Samsung SCD-2080E User Manual page 20

High resolution varifocal dome camera
Table of Contents

Advertisement

setup
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select the shutter.
-
A.FLK : Select this when you
experience picture fl icker, which can
happen when there is a clash with the
frequency of the installed lighting.
-
ESC : Select this to control the shutter
speed automatically. If ESC is selected, the shutter speed is automatically
controlled depending on the ambient illumination of the subject.
-
MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60~1/120,000 sec, PAL MODEL : 1/50~1/120,000 sec)
-
--- : Shutter speed is fi xed at 1/60sec(1/50sec).
Set the shutter mode to --- if color rolling occurs.
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fl uorescent light. Therefore, take care when
choosing the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen- but the higher the noise.
-
OFF : Deactivates the AGC function.
-
LOW : Allows automatic gain control from 5.3dB to 32dB.
-
HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the
camera automatically detects the
light level and maintains a clear
picture if this mode is activated.
-
OFF : Deactivates the SENS-UP function.
-
AUTO : Activates the SENS-UP function.
RETURN : Select this to save the changes in the EXPOSURE menu and return to
the SETUP menu.
If you press the Function Setup switch in 'AUTO' mode, You can adjust brightness by adjusting
the SENS-UP level. (x2 ~ x512)
Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.
Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
sens-up level is increased, this is normal.
If GAIN of EXPOSURE is not in use, the SENS-UP (Sensitivity-Up) is set to "---".
20_ setup
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
HIGH
4.SENS-UP
OFF
5.RETURN
LIMIT
AUTO
Press SET to Return
25
---
x2

Advertisement

Table of Contents
loading

Table of Contents