Table of Contents
Advertisement
s
r
WHEN USING THE CEILING BRACKET
Ceiling bracket
M4 tapping
screw (provided)
CAMERA
Unlocking
direction
Dome cover
1.
Hold the ceiling bracket (located where the arrow points to) and separate it
from the main body of the camera by rotating it anti-clockwise.
(refer to the picture in 'Notes' on page 13)
2.
Place the separated ceiling bracket so that the "Front" side faces the area to be
monitored and install it with the M4 tapping screws.
3.
To combine the main body with the ceiling bracket, make sure that the Pan
Base fi xing screw face the opposite side of the "Front" side of the ceiling
bracket and rotate it clockwise.
4.
Adjust the camera lens to face the area to be monitored and fi x the main body
and the dome cover by aligning the grooves and rotating the body clockwise.
An arrow for installing
directions
Locking
direction
English_13
Advertisement
Table of Contents
