HP 5120-48G EI Quickspecs page 28

QuickSpecs
Technical Specifications
Environment
Electrical characteristics Maximum heat
Safety
Emissions
Management
Services
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
dissipation
Voltage
DC voltage
Idle power
Maximum power rating
PoE power
Frequency
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
DA - 13850 North America — Version 19 — August 19, 2013
< 2.6 µs
142.9 million pps
192 Gbps
32 entries
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
10% to 90%, noncondensing
614 BTU/hr (647.77 kJ/hr)
100-240 VAC
-52 to -55 VDC
78 W
920 W
740 W
50/60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply; it is dependent
on the type and quantity of power supplies and may be supplemented with the
use of an External Power Supply (EPS).
With AC input, the Max power consumption is 550 W (370 W for PoE).
HP 5120 EI Switch Series
Page 28