HP 5120-48G EI Quickspecs page 13

QuickSpecs
Configuration
Note 10 If the CTO Switch Chassis needs to be racked, Then the CTO Base Model needs to integrate (with #0D1) to the HP
Universal Rack.
Remarks: Drop down under power supply should offer the following options and results:
Switch to PDU Power Cord - Should replace localized option with #B2B in AMS or #B2C in APJ or EMEA.
Switch to Wall Power Cord - Should leave existing Localized Option (no #B2x options)
Switch Enclosure Options
External/Redundant Power Supplies
HP RPS 800 Redundant Power Supply
Height = 1U
includes 1 x c13, 800w
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
Configuration Rules:
Note 1 If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or onsite.
Note 2 Localization required. (See Localization Menu for list.)
Note 3 Only 1 JD183A or JG136A can be connected per switch.
External/Redundant Power Cables
HP X290 1000 A JD5 2m RPS Cable
HP X290 500/800 1m RPS Cable
Enter the following menu selections as integrated to the CTO Model X above if order is factory built.
Modules
(Switch JE066x and JE067x ) No Modules supported
(All other Switches ) System (std 0 // max 2) User Selection (min 0 // max 2)
DA - 13850 North America — Version 19 — August 19, 2013
HP 5120 EI Switch Series
JD183A
See Configuration
Note:2, 3
JG136A
See Configuration
Note:2, 3
JG137A
See Configuration
Note:1
JD187A
JD190A
Page 13