HP 5120-48G EI Quickspecs page 24

QuickSpecs
Technical Specifications
HP 5120-24G EI Switch with 2 Interface Slots (JE068A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Maximum heat
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at:
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Dimensions
Weight
128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
dissipation
Voltage
Idle power
Maximum power rating
Frequency
DA - 13850 North America — Version 19 — August 19, 2013
www.hp.com/networking/services
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)
9.92 lb. (4.5 kg)
< 3.2 µs
< 2.6 µs
107.2 million pps
144 Gbps
32 entries
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
362 BTU/hr (381.91 kJ/hr)
100-240 VAC
36 W
106 W
50/60 Hz
HP 5120 EI Switch Series
for details on the service-level descriptions
Page 24