Connecting The Speakers - Philips LX700/21S/22S/25S Service Manual

Connections
IMPORTANT!
– Before connecting the AC power cord to the wall
outlet, ensure that all other connections have been
made.
– Never make or change any connections with the
power switched on.
– The type plate is located at the rear of the
system.

Connecting the speakers

Press up (or down) the speaker's jack and fully insert the
stripped portion of the speaker cable into the jack, then re-
lease.
Speakers
Front Left (L)
Front Right (R)
Center
Surround (Rear) Left (L)
Surround (Rear) Right (R)
Passive Subwoofer
1-7
NEODYMIUM RIBBON TWEETER NEODYMIUM RIBBON TWEETER
HI-FREOUENCY HI-FREOUENCY
S S U U B B
+
+ + + +
Before connecting the speakers:
-
+
black white
black red
black green
black blue
black grey
black
purple
NEODYMIUM RIBBON TWEETER
HI-FREOUENCY
.
+
.
S S U U B B
Mount the speakers onto the mini
speaker stands as shown in the illustration.
Remove the protective cover only after
the connection and installation of
speakers are completed.
Connect the supplied speaker system
using the supplied speaker cable by
matching the colors of the jacks and
speaker cable.
Notes:
– Check the speaker cables are correctly
connected. Improper connections may damage the system due
to short-circuit.
– For optimal sound performance, use the supplied speakers.
– Do not connect more than one speaker to any one pair of
+/- speaker jacks.
– Do not connect speakers with impedance lower than the
speakers supplied. Please refer to the SPECIFICATION section
of this manual.
NEODYMIUM RIBBON TWEETER
HI-FREOUENCY
AC MAIN S ~