Logging Using Syslog - Cisco TelePresence 7010 Help Manual

Logs

Logging using syslog

You can send the Event log
To configure the syslog facility, go to
Syslog settings
Refer to this table for assistance when configuring Syslog settings:
Table 38: Syslog settings
Field Field description
Host address Enter the IP addresses of up to four Syslog
1 to 4 receiver hosts.
Facility value A configurable value for the purposes of
identifying events from the Cisco
TelePresence Server on the Syslog host.
Choose from the following options:
0 - kernel messages
n
1 - user-level messages
n
2 - mail system
n
3 - system daemons
n
4 - security/authorization messages (see
n
Note 1)
5 - messages generated internally by
n
syslogd
6 - line printer subsystem
n
7 - network news subsystem
n
8 - UUCP subsystem
n
9 - clock daemon (see Note 2)
n
10 - security/authorization messages (see
n
Note 1)
11 - FTP daemon
n
12 - NTP subsystem
n
13 - log audit (see Note 1)
n
14 - log alert (see Note 1)
n
15 - clock daemon (see Note 2)
n
16 - local use 0 (local0)
n
17 - local use 1 (local1)
n
18 - local use 2 (local2)
n
19 - local use 3 (local3)
n
20 - local use 4 (local4)
n
21 - local use 5 (local5)
n
22 - local use 6 (local6)
n
23 - local use 7 (local7)
n
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
to one or more syslog servers on the network for storage or analysis.
Logs > Syslog.
Usage tips
The number of packets sent to each configured
host will be displayed next to its IP address.
Choose a value that you will remember as
being the Cisco TelePresence Server.
Note 1: Various operating system daemons
and processes utilize Facilities 4, 10, 13 and
14 for security/authorization, audit and alert
messages which seem to be similar.
Note 2: Various operating systems utilize both
Facilities 9 and 15 for clock (cron/at)
messages.
Processes and daemons that have not been
explicitly assigned a Facility value may use
any of the "local use" facilities (16 to 21) or
they may use the "user-level" facility (1) - and
Cisco recommend that you select one of these
values.
Page 68 of 92