No.mb366)1 - JVC HX-C6 Service Manual

3.1.5 Removing the rear panel
(See Fig.12)
• Remove the metal cover.
(1) From the back side of the main body, remove the twelve
screws F attaching the rear panel.
(2) Remove the sections d toward this side and remove the
rear panel.
3.1.6 Removing the amplifier board
(See Fig.13)
• Remove the metal cover and rear panel.
(1) From the top side of the main body, disconnect the wire of
the fan motor from the connector
board.
(2) Disconnect the wire from the connector
amplifier board and remove the wire from the slot e.
(3) Disconnect the wire from the connector
plifier board.
(4) Disconnect the parallel wire from the connector
the amplifier board and remove the parallel wire from the
slot e.
(5) Disconnect the card wire from the connector
amplifier board and remove the card wire from the slot f.
(6) Remove the card wire of the tuner from the slot f.
Reference:
• Remove the tuner as required.
• When connecting the each wire, pass them through
the slots (e, f) as before.
(7) Remove the screw G and take out the amplifier board from
the main body.
1-12 (No.MB366)
FAN101 on the amplifier
FAN102 on the
AW102 on the am-
CW108 on
AW101 on the
F
Fig.12
FAN102
e
FAN101
CW108
f
Card wire (for the tuner)
Fig.13
Rear panel
F
d
G
AW102
AW101
Amplifier board