Disassembly Instructions - Aiwa XR-H560MD Service Manual

DISASSEMBLY INSTRUCTIONS

1. Disassembling the MD block
Remove the CABI, STEEL. (Screws: 4 pcs on the right side, 4 pcs on the left side and 7 pcs on the rear: Total 15 screws)
Remove the 13 screws (UTT2+3-8) A and remove the rear panel.
After removing the connectors from the TUNER C.B and the FUN, remove the rear panel.
Remove the two screws (QT2+3-10) B. Open the rack and remove the HLDR, MD.
A
A
B
HOOK
B
HOOK
6