Aiwa XR-H560MD Service Manual page 13

7. Remove the CAM, LOAD in the direction of the arrow.
Re-assembling: Move the LEVER ASSY, CAM in the direction of the arrow mark as much as it can be moved.
Move the reference hole of the CAM, LOAD closer to the axis of the LEVER, SW H as close as possible.
Align the CAM, LOAD with the gear of the GEAR, IDLER2.
LEVER ASSY, CAM
Reference hole of CAM, LOAD
GEAR, IDLER2 Axis of LEVER, SW H
CAM, LOAD
13