Create Mp3 Audio Fi Les; Change Settings; Access The Setup Menu - Philips home theater Manual

Create MP3 audio À les
Use the home theater to convert audio CDs into
MP3 audio fi les.
1
Insert an audio CD (CDDA/HDCD) into
the home theater.
2
Connect a USB storage device to the home
theater.
3
When audio is played, press CREATE MP3.
CREATE MP3
OPTIONS
Speed Normal
Bitrate 128kbps
SUMMARY
Select Track 0
Time 00:00
Select All
Start Exit
4
Select the conversion settings in the
[OPTIONS] panel, then press OK.
•
[Speed] : Selects the write-to-fi le
speed.
• [Bitrate] : Selects the conversion
quality.
5
Press to access the [TRACK] panel.
6
Select an audio track, then press OK.
•
[Select All] : Selects all tracks.
• [ Deselect all] : De-selects all tracks.
7
Select [Start] in the menu to convert, then
press OK.
»
A new folder is created in the USB
storage device to store all the new MP3
audio fi les.
•
To exit the menu, select
press OK.
Note
•
During the conversion process, do not press
any buttons.
•
DTS CDs and copy-protected CDs cannot be
converted.
•
Write-protected or password-protected USB
storage device cannot be used to store MP3
fi les.
TRACK
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Deselect All
[Exit] and
6

Change settings

This section helps you to change the settings of
your home theater.
Caution
• Many of the settings are already confi gured
with the best value for the home theater.
Unless you have a specifi c reason to change a
setting, it is best to leave it at the default value.

Access the setup menu

1
Press SETUP.
»
The following menu appears.
Symbol Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2
Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
3
Press BACK to return to the previous
menu, or press SETUP to exit.
Note
•
You cannot change a setting that is grayed out.
EN 11