Play From Radio; Play Audio From Tv Or Other Devices - Philips home theater Manual

Hide thumbs Also See for home theater:
Table of Contents

Advertisement

Synchronize audio with video
If the audio and video are not synchronized, you
can delay the audio to match the video.
1
Press and hold AUDIO SYNC until the
audio sync message appears on the display
panel.
2
Press +/- within fi ve seconds to sync the
audio with your video.
Quick skip play to a speciÀ c time
Quick skip to a specifi c part of a video by
entering the time of a scene.
1
During video play, press
2
Press the Navigation buttons and OK to
select:
[TT Time] : Title time.
[Ch Time] : Chapter time.
[Disc Time] : Disc time.
[Track Time] : Track time.
3
Enter the time of the scene, then press OK.
10
EN

Play from radio

The home theater can store up to 40 radio
stations.
1
2
3
Button
INFO.
PROGRAM Manual: Press once to access
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device .
Check that the FM antenna is connected.
Press RADIO.
»
"
AUTO INSTALL...PRESS PLAY' appears
on the display panel if you have not
installed any radio stations. Press
Press the following buttons to control play:
Action
Selects a preset radio station.
/
/
Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
program mode, and press again
to store the radio station.
Automatic: Press and hold for fi ve
seconds to reinstall radio stations.
Note
AM and digital radio are not supported.
If no stereo signal is detected, or if fewer than
fi ve stations are found, you are prompted to
install the radio stations again.
For the best reception, place the antenna away
from the TV or other sources of radiation.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents