Ipv6 Menu - Lexmark MX310 Series User Manual

Understanding printer menus
Use
Enable AutoIP
Yes
No
Enable FTP/TFTP
Yes
No
Enable HTTP Server
Yes
No
WINS Server Address
Enable DDNS
Yes
No
Enable mDNS
Yes
No
DNS Server Address
Backup DNS Server Address
Backup DNS Server Address 2
Backup DNS Server Address 3
Enable HTTPS
Yes
No

IPv6 menu

To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > IPv6
• Network/Ports > Network [x] > Network [x] Setup > IPv6
Note: This menu is available only in network printers or printers that are attached to print servers.
Use
Enable IPv6
On
Off
Auto Configuration
On
Off
To
Specify the Zero Configuration Networking setting.
Note: Yes is the factory default setting.
Enable the built-in FTP server, which lets you send files to the printer using File Transfer
Protocol.
Note: Yes is the factory default setting.
Enable the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
View or change the current WINS server address.
View or change the current DDNS setting.
Note: Yes is the factory default setting.
View or change the current mDNS setting.
Note: Yes is the factory default setting.
View or change the current DNS server address.
View or change the backup DNS server addresses.
View or change the current HTTPS setting.
Note: Yes is the factory default setting.
To
Enable IPv6 in the printer.
Note: On is the factory default setting.
Specify whether or not the wireless network adapter accepts the
automatic IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
112