Head Id - Epson Stylus Photo 895 Service Manual

EPSON Stylus PHOTO 895/785EPX

5.3.4 Head ID

This adjustment writes the ID numbers for the Printhead into the EEPROM, and
enables the current settings to be confirmed.
Figure 5-8. Head ID adjustment items
Click on the item to be adjusted, and then click on the [OK] button. If [Check head ID]
has been selected, the value will be displayed in the center of the screen at the bottom.
If [Input Head ID] has been selected, the following screen will be displayed to enable
the head ID to be entered.
Adjustment
Check the 13-character ID written on each of the print heads, and enter the ID for the
head that has been replaced. Click on the [OK] button when the ID has been entered.
Click on the [Previous] button to return to the previous screen.
Adjustments with the service program
Figure 5-9. Input head ID
Revision A
121