Device Detection - LG KP270 Service Manual

5. DOWNLOAD

5.2 Device Detection

1. Connect cable within the device.
2. Windows will pop-up Found new hardware wizard and detect the new usb device.
3. Check "Install the software automatically (Recommended)" button, install driver for the device. (or
set specific location.)
4. In case of Infineon, "Flash Loader utility" will be installed. In case of Neptune, "LGE GSM Device
OMAPV1030" will be installed.
5. If you have several usb ports for usb download, you have to repeat installation from No. 1 to No.
3 for each the usb port.
Eg. In case of Infineon, "Flash Loader utility" will be installed as shown below.
LGE Internal Use Only Copyright © 2008 LG Electronics. Inc. All right reserved.
- 120 -
Only for training and service purposes