6-4 EDID Key-In Procedure
1. Execute EDID Program
(1) Click on "EDID" to execute EDID
program.
2. Process
(1) Check the COM port is COM4"
(Select the COM port which you are
using).
(2) Click the Model button.
(3) Choose the source file "*.ini" and then
open it.
3. Process
(1) Key in the serial number into the
barcode blank space.
(2) Click "Program" button.
(3) - "Please change the cable to VGA"
will be shown on the screen.
- Please press "Ok" button.
1
2
3
ZW20ST/ZX20ST
Confidential
6-4