Setting Current Day And Time - Honeywell Chronotherm IV T8601D Installation Instructions Manual

T8601D CHRONOTHERM® IV DELUXE PROGRAMMABLE THERMOSTATS

Setting Current Day and Time

1. Press Set Current Day/Time.
NOTES: On initial power up or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
Set Current Time
Run Set Current
Wake Leave
Program Day/Time
Day/Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
2. Press Day until the current day is displayed.
NOTES: Sun=Sunday, Mon=Monday, Tue=Tuesday,
Wed=Wednesday, Thu=Thursday, Fri=Friday,
Sat=Saturday.
Time
Run Set Current
Wake Leave
Program Day/Time
Day
Heat/Cool
Hold Temp Day
Settings
Daylight Copy
Time
3. Press Time or Time
displayed.
NOTES: Tapping the Set Current Day/Time changes the
time in one-hour increments.
Time
Time
Run Set Current
Wake Leave
Day/Time
Program
Heat/Cool
Hold Temp Day
Settings
Daylight Copy
Time
NOTES: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Time Set Program
Daylight
Run Set Current
Wake Leave
Day/Time
Program
Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
69-1410—2
Set Day/Time
PM
Set Program
Return Sleep
Mon
System Fan
Set Day/Time
PM
Set Program
Return Sleep
Tue
System Fan
until the current time is
Set Day/Time
AM
Set Program
Return Sleep
Tue
System Fan
Set Day/Time
AM
Return Sleep
Tue
System Fan
DST
4. Press Run Program.
Run
Program
Hold Temp
Viewing or Resetting Timer Settings
When the thermostat activates a timer, the thermostat
flashes Filter until the timer resets.
M14619
1. Reset the timer by pressing the i key until the
expired timer is displayed.
Filter
M14620
2. Press the Time
Filter
3. Press the Run Program key.
M14621
NOTE: You can view the number of days remaining at
any time by pressing the i key three or four
times. If more than one timer is active, all active
timers show sequentially when pressing the
i key several times.
M14622
8
Time Set Program
Set Current
Run
Wake Leave Return Sleep
Program Day/Time
Tue
Heat/Cool
Day System Fan
Settings
Wake
Daylight
Copy
Time
Days
key to reset the timer.
Days
System
Heat
AM
Fan
Room
DST Auto
M14623
M20243
M20244