Setting Current Day And Time; Installer System Test - Honeywell T8602C Chronotherm IV Manual

T8602C CHRONOTHERM® IV DELUXE PROGRAMMABLE THERMOSTATS

Setting Current Day and Time

1. Press Set Current Day/Time.
NOTE: On initial powerup or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
3. Press Time A or Time V until the current time is dis­
played.
NOTE: Tapping the Set Current Day/Time changes the
time in one hour increments.
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
4. Press Run Program.
69-1509—2
^ ^ ^ ^ ^ ^ ■ sëTD iÿÏÏim ë |
i n n
P M
_
S e t D a y /T im e
Q: lb*"

INSTALLER SYSTEM TEST

Use the Installer System Test to check the thermostat
operation. Refer to Table 4 for a list of the available
system tests.
A CAUTION
Equipment Damage Hazard.
Minimum compressor off-time is bypassed
during Installer System Test.
Avoid cycling compressor quickly.
To start the system test:
Press and hold the increase s and decrease t keys at the
same time until 10 appears. All segments of the display
will be displayed before the 10 appears.
See Fig. 12 and 13.
Table 4. Tests Available In Installer System Test.
Test
Number
10-19 Heating equipment can be turned on and off.
30-39 Cooling equipment can be turned on and off.
40-49 Fan equipment can be turned on and off.
M14620
60 0 to Keyboard keys test.
60 19
70-79 Thermostat information including date code
and software versions is displayed.
Waif Set P ro gra m S e t D ay/Tim e Temporary
Recovery
D O - O D
Hold for
0 0
Filter | E m Ht | A u x H j
M onTueW e dT hu F ri S atSun
Wake Leave
Fig. 12. Display of all LCD segments.
M14622
Fig. 13. Display of test number.
Refer to Table 5 for the directions and results of the
specific tests
M14623
NOTE: Press Time A to advance to the next test and
Time V to go back to the previous test. Press
Run Program to exit the system test.
8
System Test Description
Setting
- 0 0 p ~ Q Q g Q
Days
Repl Batt Room Outdoor \
Return Sleep DST ▼ Heat Cool
i n
I u
Svstem
Q , ' Em Heat
iv
¡ A ■ * " o 0
On
a
Auto
M14559
I
I
M14612